Tweet
[ALL SOLD] CELUX 44MM CH PRO PILOT I - ETA/UNITAS 6497 CLONE - MANUAL WIND 17J - ASSEMBLED IN NEW ZEALAND - PRICE: $420 Delivered
For a long time, we've tried to make locally high quality watches but the problem has always been, parts supply. It's not hard periodically to get quality cases, sapphires, movements, displays & indicators etc but to be able to get it all together at once, all of top quality, all fitting perfect, a whole watch assembled, with all equally high quality parts has taken a decade of trying, and hundreds of assembled watches.
Quality of fit & finish, and the detail of the parts is evident in the images taken outside in full blown natural sunlight.
CELUX 44MM CH PRO PILOT I FEATURES:
STAINLESS STEEL BRUSHED & POLISHED 3-BODY 44MM SAPPHIRE SANDWICH
TOP QUALITY HIGHLY DECORATED 17J ETA/UNITAS CALIBRE 6497 CLONE
CAMBERED DOUBLE ANTI-REFLECTIVE COATED FRONT COVER
VERY FINE LUMINOUS BLACK SWORD INDICATORS
SUPER QUALITY LUMINOUS MATT BLACK DISPLAY
IWC STYLE MILLED STAINLESS TANG BUCKLE
GENUINE LEATHER 'PILOT' STRAPS
8MM O/SIZE ONION CROWN
DIMENSIONS:
CASE: 44
THICK: 12.7
WIDTH: 49.3
LENGTH: 52.2
WEIGHT: 77.8
If any of you have tried to assemble a watch, you will know how difficult it is to get fit & finish on par with (our goal) a $5000 SWISS watch, or a $2000 SEIKO, well this is very close to our goal, the movements we have been able to buy this year, time extremely well - this is not $200 of parts slapped together, these parts, cost more than that, and, if you spent $200 on parts, you'd get mis-matched parts of about a 1/3rd this quality... just saying'.
REMEMBER: sure, unequivocally, without a doubt, these parts are all 100% 'PROUDLY MADE IN CHINA' but then again, only a 1/3rd of the parts required to assemble a ROLEX have to be made within the confines of the Swiss borders.
WARRANTY: Worldwide Transferable Warranty 2x the period of the Official ROLEX Warranty
ASSEMBLED BY: 'The Watchmakers to the Watchmakers', the best in New Zealand
CONDITION: TKNZ 96% Mint Easily less than 2 weeks old of course
PRICE: $420 delivered
PICTURES:
(NOTE: There is a case back protective sticker on the watch in all photo's, I didn't notice till the watch was up on the big screen, larger than life, just now)
Quality of fit & finish, and the detail of the parts is evident in the images taken outside in full blown natural sunlight.
CELUX 44MM CH PRO PILOT I FEATURES:
STAINLESS STEEL BRUSHED & POLISHED 3-BODY 44MM SAPPHIRE SANDWICH
TOP QUALITY HIGHLY DECORATED 17J ETA/UNITAS CALIBRE 6497 CLONE
CAMBERED DOUBLE ANTI-REFLECTIVE COATED FRONT COVER
VERY FINE LUMINOUS BLACK SWORD INDICATORS
SUPER QUALITY LUMINOUS MATT BLACK DISPLAY
IWC STYLE MILLED STAINLESS TANG BUCKLE
GENUINE LEATHER 'PILOT' STRAPS
8MM O/SIZE ONION CROWN
DIMENSIONS:
CASE: 44
THICK: 12.7
WIDTH: 49.3
LENGTH: 52.2
WEIGHT: 77.8
If any of you have tried to assemble a watch, you will know how difficult it is to get fit & finish on par with (our goal) a $5000 SWISS watch, or a $2000 SEIKO, well this is very close to our goal, the movements we have been able to buy this year, time extremely well - this is not $200 of parts slapped together, these parts, cost more than that, and, if you spent $200 on parts, you'd get mis-matched parts of about a 1/3rd this quality... just saying'.
REMEMBER: sure, unequivocally, without a doubt, these parts are all 100% 'PROUDLY MADE IN CHINA' but then again, only a 1/3rd of the parts required to assemble a ROLEX have to be made within the confines of the Swiss borders.
WARRANTY: Worldwide Transferable Warranty 2x the period of the Official ROLEX Warranty
ASSEMBLED BY: 'The Watchmakers to the Watchmakers', the best in New Zealand
CONDITION: TKNZ 96% Mint Easily less than 2 weeks old of course
PRICE: $420 delivered
PICTURES:
(NOTE: There is a case back protective sticker on the watch in all photo's, I didn't notice till the watch was up on the big screen, larger than life, just now)
Comment