Carrera Chrono 43MM Strap Advice Sought

Post Reply
Posts: 284
Joined: Wed Nov 04, 2009 10:46 am

Carrera Chrono 43MM Strap Advice Sought

Post by rolex » Thu Apr 20, 2017 2:26 pm


This is CV210A.FC6235.FC5037 (Case/Strapset/Deployant)

1.jpg (544.09 KiB) Viewed 215 times

22.JPG (612.31 KiB) Viewed 215 times

11.jpg (663.2 KiB) Viewed 215 times

16.jpg (498.11 KiB) Viewed 215 times

Does FC6005 Rubber strap set fit, anyone know for sure, TAG Heuer tell me "NO', but Authentic seem to sell CV210A.FT6005 but possibly fit a FC5014 Deployant...

Is a FC5014 same or different to a FC5037 in terms of fitment, seems that FC5037 might be intended for thicker straps (Reptile) and the FC5014 might be intended for thinner (Rubber) straps :?:

Anyone know?

CV210A.FT6005.png (405.53 KiB) Viewed 215 times

User avatar
Posts: 1944
Joined: Tue Aug 18, 2009 9:28 pm
Location: Arrears, praying for time...

Re: Carrera Chrono 43MM Strap Advice Sought

Post by harlansmart » Thu Apr 20, 2017 4:23 pm

Maybe FT6020... how does one know if the curved ends fit the CV210A 43MM Carrera properly..

FC6020.png (221.58 KiB) Viewed 200 times
The FC5037 which comes with the cal. 1887 and is designed to fit a thick strap like the original FC6266 (opening of 2.8 mm at the 18 mm end of the strap) and the FC5014 which is designed for thinner straps like the original FC6205 and FC6003 (opening of 1.8 mm at the 18 mm end of the strap)... It took me a while to find this out, since both these buckles can be bought separatly, and these differences can not be distinguished at sight.
Timekeeper Watch Club
Auckland, New Zealand, Pacific Ocean, Earth

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest